Home > News > Company News

Car brake pad replacement process


The process for replacing brake pads can vary depending on the make and model of the car, but here are some general steps that can help guide you:

1. Prepare your workspace: Make sure your car is parked on a flat surface and engage the parking brake. You should also have all the necessary tools and equipment ready, including a jack, jack stands, lug wrench, a C-clamp, and new brake pads.

2. Remove the wheels: Loosen the lug nuts on the wheel you're working on, then jack up the car and place it securely on jack stands. Remove the lug nuts and take off the wheel.

3. Remove the brake caliper: Use a wrench to remove the bolts that hold the brake caliper in place. Then, gently pry the caliper away from the rotor and hang it from a wire or bungee cord so it doesn't dangle from the brake line.

4. Remove the old brake pads: Use a screwdriver or pliers to remove the retaining clips or pins that hold the brake pads in place. Then, remove the brake pads from the caliper.

5. Install the new brake pads: Use the C-clamp to compress the caliper piston back into its housing. Then, slide the new brake pads into place and secure them with the retaining clips or pins.

6. Reinstall the brake caliper: Slide the brake caliper back over the rotor and secure it in place with the bolts you removed earlier.

7. Replace the wheel: Put the wheel back on and tighten the lug nuts. Lower the car off the jack stands and tighten the lug nuts again.

8. Repeat the process for the other wheels: Follow the same steps to replace the brake pads on the other wheels.

9. Test the brakes: Before driving your car, pump the brakes a few times to make sure they're working properly. You may also want to take your car for a test drive in a safe area to make sure everything is working as it should.

It's important to note that the above steps are general guidelines and may not apply to every make and model of car. Always consult your car's owner's manual or a trusted mechanic for specific instructions and advice.

Previous:No News
Next:No News

Leave Your Message